6 Maintenance Tips for Machine Tools

Machinery repair aboard the nuclear powered aircraft carrier USS Abraham Lincoln.
U.S. Navy photo by Photographer’s Mate Airman Jason Frost.

When maintaining machine tools, it’s extremely important to perform it properly in order to ensure their longevity. Be it upkeep or regular check ups on attachments, keeping the machinery and its tools up to date cannot be stressed enough. Anything could happen to them if these equipment are not checked routinely and well maintained.

CNC machines and machine tools are the backbone of the manufacturing industry. They are the machines responsible for making other machines. And hence, ensuring smooth operation of such machinery is not just crucial for the machine tool industry but for the manufacturing industry as a whole. Excellent machine tools can be a hefty investment, but they can work for a very long time.

Given below are a few of the ways that you can keep your machine tools nicely maintained.

1. Check The Lubrication

The first thing to keep in mind is to inspect the lubrication levels of machine tools. By ensuring that the equipment are lubricated correctly, you can easily protect their motors over a long time. Make sure the grease and oil is applied to all moving parts or components of each tools. Always use the right quantity of oil and correct lubricants for your machinery to prevent breakdowns.

2. Sharpen Key Parts

If you’re using machine tools with components built for cutting, pruning, or sharpening, then you need to be sure that the parts keep their sharpness. If you’re using laser for cutting, then make sure these parts are also in good condition. Without routine maintenance to keep cutters sharp for optimal performance, you’d be putting your production quality in a high risk. Ensure those cutters and tool-bits are sharpened properly.

3. Check Alignment Specifications

The last thing that you want when it comes to your machine tool is to have a particular component or attachment out of alignment. Partial misalignment may adversely affect the machine’s functionality. To decide if your machine tools are properly aligned, simply go for a few test jobs and measure the specifications of the produced parts.

4. Inspect the Cleanliness

Though this is obvious, you need to make sure that you clean your machine tools frequently. By cleaning different parts of machines either daily or weekly, you will make sure that they’re in optimum running condition. When machines collect a lot of grime or begin rusting, long-term problems may appear.

5. Take Good Care of Parts & Equipment

To properly maintain all your machine tools, it is necessary to check on all of your components and accessories routinely. This preventative care includes handling all of your machine equipment and accessories carefully and stored them safely. Guard against mindless behavior, and do everything you can to detect possible problems. Problems are easier to solve when detected early. Keep a checklist and attentively record all maintenance procedures before moving further.

6. Don’t Overwork Your Own Machines

Do not exceed your machine parts’ stated requirements and specifications as found in your owner’s guide. If you need to be familiar with concepts such as weight limitations for inclines, or loads for transit, take an introductory physics course. This knowledge will help you to avoid severe damage to the machines.

Also, most machines are programmed with multiple power modes, and it is essential to make sure that your machines are operated at the right power mode.

By following the above precautionary measures, you can prolong the life span of your machines and save yourself from unpleasant shocks and machine failures. Remember to check all your machine parts regularly and keep them in optimum working condition.

Add a Comment

Your email address will not be published. Required fields are marked *